Applications
Features
Advantages
TANKER LOADING SPOUTS
These telescopic loading spouts are designed to load dry, dusty products into silo tankers and closed railcars or containers.
TANKER LOADING BELLOWS BENEFITS
- sealing cone for perfect tanker sealing
- closure cone to prevent any spillage of dust as the loading spout is being raised
- level switch indicating when the tanker is full
- electric winch with limit switches and emergency sensors
- three cable lifting system
- unit comes fully or partly pre-assembled
MAIN TECHNICAL FEATURES
- max. flow rate: up to 200-250 m3/h (based on the model)
- level switch: rotary / vibrating / capacitance
- operating conditions: -40/+80°C (other per request)
- loading conduit: cones/single bellows, cones/double bellows
- dedusting: spouts with built-in dust collectors / external filtration / connection to existing dedusting technology
ACCESSORIES
- electric control box (plastic or stainless steel)
- pendant or remote control
- vibration unit to shake off the rest of the product from the equipment
- shut-off valves (manual, pneumatically and electrically driven)
- ATEX design
NZU300E
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 250 m³
- grain size 0-40 mm
- inlet diameter DN300
- pipe Ø 125 mm for connection to remote dust filtration
- operating temperature -20 °C / +80 °C
- motor drive 0.55 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - rotary / vibrating / capacitance type
- bottom closing cone to prevent any spillage of dust as the loading spout is being raised
Additional Accessories
- electric control box
- pendant or remote control
- vibration unit
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
NZU300S
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 300 m³
- grain size 0-40 mm
- inlet diameter DN300
- pipe Ø 250 mm for connection to remote dust filtration
- operating temperature -20 °C / +80 °C
- motor drive 0.9 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - rotary / vibrating
- rubber-coated sealing cone for perfect tanker sealing
- bottom closing cone to prevent any spillage of dust as the loading spout is being raised
- available with the external dust collector and double bellows
Additional Accessories
- electric control box
- pendant or remote control
- vibration unit
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
NZUF300E
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 250 m³
- grain size 0-40 mm
- inlet diameter DN300
- operating temperature -20 °C / +80 °C
- motor drive 0.55 kW
- built-in filter: flow rate 900 m³/h, filter area 17.5 m², residual concentration at the output < 10 mg/m³
- internal thread G ½"
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - rotary / vibrating / capacitance type
- bottom closing cone to prevent any spillage of dust as the loading spout is being raised
Additional Accessories
- electric control box
- pendant or remote control
- vibration unit
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
TRUCK/RAILCAR LOADING SPOUTS
These telescopic loading spouts are designed for the efficient dust-free loading of dry, dusty bulk solids into trucks and railcars.
TRUCK/RAILCAR LOADING BELLOWS BENEFITS
- dust-free loading secured by the outer dedusting bellows
- bottom part with dustproof skirt with inner level switch automatically stepping the skirt
- electric winch with limit switches and emergency sensors
- three cable lifting system
- unit comes fully or partly pre-assembled
MAIN TECHNICAL FEATURES
- max. flow rate: 800 m3/h (based on the model)
- level switch: rotary / vibrating
- operating conditions: -40/+80 °C (other per request)
- loading conduit: cones / single bellows, telescopic tubes / single bellows
ACCESSORIES
- electric control box (plastic or stainless steel)
- pendant or remote control
- vibration unit to shake off the rest of the product from the equipment
- shut-off valves (manual, pneumatically and electrically driven)
- ATEX design
NZOF300E
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 250 m³
- grain size 0-80 mm
- inlet diameter DN300
- operating temperature -20 °C / +80 °C
- motor drive 0.55 kW
- built-in filter: flow rate 900 m³/h, filter area 17.5 m², residual concentration at the output < 10 mg/m³
- internal thread G ½"
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - rotary / vibrating
- dustproof bell rubber skirt at the lower end of the loading spout
- available also with manual winch
Additional Accessories
- electric control box
- pendant or remote control
- vibration unit
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
NZO300E
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 250 m³
- grain size 0-80 mm
- inlet diameter DN300
- pipe Ø 125 mm for connection to remote dust filtration
- operating temperature -20 °C / +80 °C
- motor drive 0.55 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - rotary / vibrating
- dustproof bell with rubber skirt at the lower end of the loading spout
- available also with manual winch
Additional Accessories
- electric control box
- pendant or remote control
- vibration unit
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
NZO400S
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 400 m³
- grain size 0-100 mm
- inlet diameter DN400
- operating temperature -20 °C / +80 °C
- motor drive 0.9 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - rotary / vibrating
- dustproof bell with rubber skirt at the lower end of the loading spout
Additional Accessories
- electric control box
- pendant or remote control
- vibration unit
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
NZO600H
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 500 m³
- grain size 0-100 mm
- inlet diameter DN600
- operating temperature -20 °C / +80 °C
- motor drive 2.2 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - 2x rotary
- dustproof bell rubber skirt at the lower end of the loading spout
Additional Accessories
- electric control box
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
STOCKPILE LOADING SPOUTS
These telescopic loading spouts are designed for the efficient dust-free loading of dry, dusty bulk solids on stockpiles.
STOCKPILE LOADING BELLOWS BENEFITS
- robust design and construction – you will not destroy this device!
- bottom part with dustproof skirt with inner level switch automatically stepping the skirt
- electric winch with limit switches and emergency sensors
- three cable lifting system
- particle size up to 500 mm
MAIN TECHNICAL FEATURES
- max. flow rate: 2000-3000 m3/h (based on the model)
- level switch: rotary / tilt
- operating conditions: -40/+80°C (other per request)
- loading conduit: tubes/single bellows, tubes
ACCESSORIES
- electric control box (plastic or stainless steel)
- external dust collector
- maintenance platform
- inlet hoppers
- ATEX design
NZO300S
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- Inlet diameter DN300
- max. flow rate 250 m³
- grain size 0-50 mm
- pipe for connection to remote dust filtration
- operating temperature - 20 °C / + 80 °C
- motordrive 1,6 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - 2x rotary
- dustproof bell rubber skirt at the lower end of the loading spout
Additional Accessories
- electric control box
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
NZO600DH
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- Inlet diameter DN600
- max. flow rate 1000 m³/h
- grain size 0-100 mm
- pipe for connection to remote dust filtration
- operating temperature - 20 °C / + 80 °C
- motordrive 3 or 4 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - 2x rotary
- dustproof bell rubber skirt at the lower end of the loading spout
Additional Accessories
- electric control box
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
- external dust collector
NZO900DH
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 2000 m³/h
- grain size 0-400 mm
- inlet diameter DN900
- operating temperature - 20 °C / + 80 °C
- motordrive 5.5 / 7.5 / 9.2 / 11.0 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - 4x tilt type
- dustproof bell rubber skirt at the lower end of the loading spout
Additional Accessories
- electric control box
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
SHIP LOADING SPOUTS
The Shiploader telescopic loading spout allows high-capacity ship loading.
MAIN TECHNICAL FEATURES
- max. flow rate: 4000 m3/h (based on the model)
- level switch: rotary / tilt
- operating conditions: -20/+80°C (other per request)
- loading conduit: tubes/single bellows, tubes
ACCESSORIES
- electric control box (plastic or stainless steel)
- pivot gimbals (movable in one or two axis)
- protection cages
- load cells to control the spout would not be overloaded
- ATEX design
Limestone
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
MAIN TECHNICAL FEATURES
- max. flow rate: 4000 m3/h (based on the model)
- level switch: rotary / tilt
- operating conditions: -20/+80°C (other per request)
- loading conduit: tubes/single bellows, tubes
Additional Accessories
- electric control box
- pivot gimbals (movable in one or two axis)
- protection cages
- load cells to control the spout would not be overloaded
- ATEX design
We offer two types of shiploaders:
1. with distribution trimmer shovel
angle of rotation up to 350°
available also with tilting mechanism
2. with dustproof bell and rubber skirt
COMBINED LOADING SPOUTS
NZK telescopic loading spouts are designed for the efficient dust-free loading of dry, dusty bulk solids into both tankers and open vehicles or railcars.
COMBINED LOADING BELLOWS BENEFITS
- 2 loading spout combined in 1
- dust-free loading secured by the dustproof skirt with inner level switch automatically stepping the skirt
- bottom cone for the perfect sealing on the tanker opening
- three cable lifting system
- unit comes fully or partly pre-assembled
MAIN TECHNICAL FEATURES
- max. flow rate: 100-200 m3/h (based on the model)
- level switch: rotary / vibrating / capacitance
- operating conditions: -40/+80°C (other per request)
- loading conduit: cones/single bellows, cones/double bellows
ACCESSORIES
- electric control box (plastic or stainless steel)
- pendant or remote control
- vibration unit to shake off the rest of the product from the equipment
- shut-off valves (manual, pneumatically and electrically driven)
- ATEX design
NZK300ER
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 250 m³
- grain size 0-40 mm
- inlet diameter DN300
- pipe Ø 125 mm for connection to remote dust filtration
- operating temperature -20 °C / +80 °C
- motor drive 0.55 kW
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - vibrating / capacitance type
- bottom part consisting of sealing cone and dustproof bell with rubber skirt
- available also with electrical lifting of the dustproof bell
Additional Accessories
- electric control box
- pendant or remote control
- vibration unit
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
NZKF300ER
telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers
OPERATION QUALITIES
- max. flow rate 250 m³
- grain size 0-40 mm
- inlet diameter DN300
- operating temperature -20 °C / +80 °C
- motor drive 0.55 kW
- built-in filter: flow rate 900 m³/h, filter area 17.5 m², residual concentration at the output < 10 mg/m³
- loading conduit consisting of internal cones and outer bellows
Design
- electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
- terminal box for cable connection
- level switch - vibrating / capacitance type
- bottom part consisting of sealing cone and dustproof bell with rubber skirt
- available also with electrical lifting of the dustproof bell
Additional Accessories
- electric control box
- pendant or remote control
- vibration unit
- shut off valves (manual, electro, pneumatic)
- design for ATEX / non-standard temperature (-40 °C / +250 °C)
